Application | Centrifugal Oil Separator for Power Generating
The continuous treatment of fuel and lube oils for turbines and diesel engines is the key to reliable power supply.
CS series Centrifugal Oil Purifiers designed by PureTech are used in power plants to treat fuel oils and turbine oils for turbines and diesel engines. Precision separation of water, solid particles and oil is essential to the smooth operation of generators. The result is a reliable, cost-effective supply of energy and efficient use of natural resources. An uninterrupted power supply requires systems that operate continuously, trouble-free, efficiently and reliably in all load ranges.
Principle | Centrifugal Oil Separator for Power Generating
Centrifugal Oil Purifier for Power Plants working base on below principle:
Using the difference of the density of different materials (oil, water, mechanical impurities, solid particles and dust, etc.), under the centrifugal force generated by high-speed rotation, the separation of materials of different density is realized.
In our design of centrifuge separator, we considered the high efficiency and effect, install the electric heater and multi-stage filtration device to further improve the oil processing effect. Therefore it can reduce the wear of steam turbine or other types of machines, as well as extend the service life of the machine and oil.
When processing emulsified turbine oil, our Model TOP thermal vacuum turbine oil filtration machine is recommened, which has the demulsification device (emulsion breaking) and especially suitable for emulsified oils.
• Separation of oil-water-solids mixtures.
• Treatment of fuel oil for diesel engines and gas turbine generators.
• Lube oil treatment.
• The maximum solids content in the turbine oil after treatment is no more than 0.005% (by weight) by clarification with its initial content of mechanical impurities up to 0.08% (by weight).
• The moisture content of the turbine oil after treatment is less than 0.02% (by weight) by claification with its initial moisture content up to 1% (by weight).
• High efficiency in oil processing with high speed centrifugal force.
• Hot Separation: with a preheater before separators, which reduces oil viscosity and improves separation effect.
• No consumables, work by centrifugal force.
• Extra multi-stage filtration system is integrated.
• Easy to operate and maintain, with protection settings, alarm and emergency stop.
• Operation modes are available for selection, manual type and automatic type.
Technical Parameters | Centrifugal Oil Separator for Power Generating
|
Model |
CS-1500 |
CS-2000 |
CS-3000 |
CS-4000 |
CS-6000 |
|
Capacity, Liters/hour |
1500 |
2000 |
3000 |
4000 |
6000 |
|
Working pressure, Mpa |
≤ 0.2 |
||||
|
Power supply |
380V, 50Hz, 3Phase or as needed |
||||
|
Drum speed, r/min |
7300 ~ 8300 |
||||
|
Cleanliness, NAS |
≤ 6 |
||||
|
Sludge-discharge methods |
Manual / Automatic |
||||
|
Lift head, m |
≥ 20 |
||||
|
Total Power, KW |
28 |
33 |
38 |
43 |
57 |
| Suitable for liquid | Turbine oil, ISO VG 32, 46 | ||||
* OPTIONAL CONFIGURATIONS: PLC automatic control system, Fully-Touch Screen, Explosion-proof type, Online Oil Testing Instruments, etc.
* Please inquire us for other flow rates or types.
* The machine size and weight will change slightly due to different configurations.
Service | PureTech Oil Filtration
• 12 months of quality guarantee for non-human damage.
• Lifelong maintenance and spare parts supply.
• Free training on operation, maintenance and troubleshooting at PureTech factory.
• Puretech engineers go to customer site for commissioning and training (payable service).
• Design accept user's customization.
