Overview | Turbine Lube Oil Purification System
TOP series turbine oil purification system is a special device for the purification of lube oil quality such as turbine oil, lubricating oil and cooling oil that needs to remove a large amount of water and impurity.
During the long-term operation of industrial equipment, moisture, impurities and mechanical particles will be mixed into the lubrication system due to various reasons, which can easily lead to the corrosion and wear of the metal parts of the unit, which reduces the lubrication performance of the lube oil and affects the safe operation of the unit.
The TOP series turbine oil purification system is equipped with a special demulsification filter element, a water removal and acid removal filter element, which can effectively remove a large amount of water, impurities, metal particles, acidic substances, varnish, etc. in the turbine oil and other lubricating oils to ensure the cleanliness of the oil. Extend the service life of steam turbines and other equipment.
• Water
content shall be decreased to less than 50 ppm.
• Total gas
content shall be reduced down to less than 0.1%.
• Three stages of filters to ensure the filtering
precision of 1~5 micron.
• Demulsifying
value by thermal vacuum turbine oil purifier is less than 15 min.
• Cleanliness of turbine oil after purification will reach or better than NAS 6 grade.
• Remove varnish and sludges which cannot be removed by centrifuge separators.
• Oil flow range from 600 liters/hour up to 18000 liters/hour for selection according to the actual demands.
• Exclusive patented degassing technology, several times the area of traditional evaporation methods, and twice the residence time of traditional evaporation.
• The precision of the fine filter element is optional from 1 to 5 microns, β≥1000, and the solid particle retention rate is as high as 99.99%.
• Demulsifying chamber is designed especially for emulsion breaking, it makes up for the technical defect that the centrifuge cannot remove emulsified water.
• Electrical heater is equipped with thermostat, avoid overheating of turbine oil.
• Design of thermal vacuum (vacuum & heating) to promote the efficiency of turbine oil dehydration.
• Equipped with a motor overload protection device to protect the safe operation of the motor.
• Mobile Type, Continuous working and available for online processing of turbine oil after connecting with the lubricating oil tank of steam turbine.
• Power supply can be customized according to your local power.
Technical Parameters | Turbine Lube Oil Purification System
|
Machine Parameter |
Item | Unit | TOP-10 | TOP-20 | TOP-30 | TOP-50 | TOP-100 | TOP-150 | TOP-200 | |
| Flow rate | liters/hour | 600 | 1200 | 1800 | 3000 | 6000 | 9000 | 12000 | ||
| Vacuum degree | Mpa | (-0.08) ~ (-0.099) | ||||||||
| Working pressure | Mpa | ≤ 0.3 | ||||||||
| Temperature range | ℃ | 40 ~ 80 | ||||||||
| Power supply | 380Volts, 50Hz, 3Phase (Or customized) | |||||||||
| Heating power | kw | 9 | 15 | 24 | 30 | 60 | 90 | 96 | ||
| Total power | kw | 10.5 | 17 | 26 | 33 | 66 | 98 | 106 | ||
| Inlet/outlet diameter | mm | 19 | 25 | 32 | 32 | 48 | 50 | 58 | ||
| Size | Length | mm | 930 | 1200 | 1400 | 1500 | 1650 | 1750 | 1900 | |
| Width | mm | 610 | 710 | 850 | 950 | 1200 | 1200 | 1250 | ||
| Height | mm | 1280 | 1290 | 1300 | 1400 | 1800 | 1820 | 1950 | ||
| Weight | kg | 210 | 250 | 280 | 350 | 650 | 1150 | 1300 | ||
| Oil index after purification | Cleanliness | NAS | ≤ 6 | |||||||
| Water content | ppm | ≤50 | ||||||||
| Filtering accuracy | micron | 1 | ||||||||
| Demulsification value (emulsion breaking) | min | ≤ 15 | ||||||||
* Please inquire us for other flow rates or types.
* The machine size and weight will change slightly due to different configurations.
* Customizing equipment is available on request.
Service | Turbine Lube Oil Purification System
• 12 months of quality guarantee for non-human damage.
• Lifelong maintenance and spare parts supply.
• Free training on operation, maintenance and troubleshooting at PureTech factory.
• Puretech engineers go to customer site for commissioning and training (payable service).
• Design accept user's customization.
