Description | Vacuum Oil Treatment Plant For Transformer Oil
Transformer oil works mainly as two functions in power transformers, that is a Dielectric Insulator and Coolant. During transformer running, voltage, running time, heating and environment cause this transformer oil to degrade and loose its properties. By adopting Dielectric Oil Treatment Plant with High Vacuum, the amount of water, gas and impurities in the transformer oil will be significantly reduced, thus improving oil properties like breakdown voltage, dielectric strength,etc.
PureTech Transformer Oil Treatment Plant with High Vacuum is designed for high voltage power transformers above 110kv, with Double-Stage High Vacuum Pumps and Specially-designed Dgassing Chambers, the effect of water evaporation and gas separation is dramatically improved to a greatest extent.
Meanwhile, this Dielectric Oil Treatment Plant with High Vacuum can also be used for vacuuming transformers independently.
1. Transformer oil filtration plant capacities : 600 LPH ~ 18000 LPH.
2. Vacuum Stages of transformer oil filtration plant :
A. Single Stage (vacuum pump only)
B. Double Stage (high vacuum type, vacuum pump and vacuum booster pump, available for transformer evacuation)
C. Customized option (e.g. two sets of vacuum pumping systems)
3. Filtration Stages of transformer oil filtration plant :
A. Three stages filter cartridges
B. Two stages filter cartridges
4. Regeneration function of transformer oil filtration plant :
A. without regeneration
B. with regeneration (remove acids, oxides, sulfur, and improve oil color)
5. Mounting arrangement of transformer oil filtration plant :
A. Skid-mounted (base frame on movable casters)
B. Trailer-mounted (single axle, two pneumatic automobile tyres and one guide wheel)
C. Trailer-mounted (double axles, four pneumatic automobile tyres and one guide wheel)
Performance | Vacuum Oil Treatment Plant For Transformer Oil
• Improvement of transformer oil dielectric strength breakdown voltage from 20 KV to above 75 KV.
• Removal of moisture from 100 ppm to below 5 ppm after vacuum dehydration.
• Removal of gases from 10% to below 0.1% after vacuum degassing.
• Filtering capacity: Max. particle size less than 1~5 micron in the filtered oil, 3-stages filtering elements.
Specifications| Vacuum Oil Treatment Plant For Transformer Oil
Machine Parameter |
Item |
Unit |
DVOP-30 |
DVOP-50 |
DVOP-75 |
DVOP-100 |
DVOP-150 |
DVOP-200 |
DVOP-300 |
|
Flow rate |
liters/hour |
1800 |
3000 |
4500 |
6000 |
9000 |
12000 |
18000 |
||
Vacuum degree |
Mpa |
(-0.08) ~ (-0.099) |
||||||||
Working pressure |
Mpa |
≤ 0.3 |
||||||||
Temperature range |
℃ |
40 ~ 80 |
||||||||
Power supply |
|
380Volts, 50Hz, 3Phase (Or customized) |
||||||||
Heating power |
kw |
24 |
30 |
48 |
60 |
90 |
120 |
130 |
||
Total power |
kw |
26 |
34 |
54 |
68 |
100 |
135 |
146 |
||
Inlet/outlet diameter |
mm |
32 |
32 |
44 |
44 |
50 |
58 |
65 |
||
Size |
Length |
mm |
1250 |
1350 |
1550 |
1800 |
2000 |
2100 |
2300 |
|
Width |
mm |
900 |
1000 |
1150 |
1400 |
1750 |
1850 |
2000 |
||
Height |
mm |
1450 |
1500 |
1700 |
1750 |
1800 |
2250 |
2300 |
||
Weight |
kg |
500 |
600 |
800 |
1100 |
1300 |
1900 |
2300 |
||
Oil index after purification |
Breakdown voltage |
kV |
≥75 (Spherical electrodes) |
|||||||
Water content |
ppm |
≤5 |
||||||||
Gas content |
% |
≤0.1 |
||||||||
Filtering accuracy |
micron |
1 |
Scope of Supply| Vacuum Oil Treatment Plant For Transformer Oil
• Base frame
• Coarse oil filter (pre filter)
• Electric heater
• Degassing chamber (level sensor, etc.)
• Oil pump
• Fine filter
• Vacuum pump and vacuum booster pump
• Foam control
• Measuring gauges and instrumentation
• Valves and hoses
• Transformer evacuation connection
• Electric control cabinet
ADDITIONAL FEATURES ON REQUEST:
* PLC and HMI Control Panel and automation (automatic defoaming, automatic oil pump start/off, working modes switch, etc.)
* Online monitoring tester of moisture content (ppm)
* Online digital pirani gauge
* The machine size and weight can be changed slightly as per your requirements.
* Vacuum Pump Set, Dry Air Generator, SF6 Gas Recovery and Filling Machine can be selected alongwith.
• 12 months of quality guarantee.
• Lifelong maintenance and spare parts supply.
• Free training on operation, maintenance and troubleshooting at PureTech factory.
• Puretech engineers go to customer site for commissioning and training (payable service).
• Design accept user's customization.